Clicking Noise from Engine
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Clicking Noise from Engine
I am guessing this might be something seriously wrong hoping not. I haven't had time to look farther but i do know it is not an exhaust leak or the fan hitting something. I get a click/knocking noise from the motor don't know if it is from the top or bottom end yet it was fine when i left home this morning and started after i had been driving a while (about 20 to 30 min ) then noticed it. didn't notice any loss of power. It does increase and decrease with RPM. Any Suggestions are welcome.
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Bow_Tied
- Moderator
- Posts: 6161
- Joined: Mon Jun 02, 2008 11:20 pm
- Reactions score: 5
- Location: London
- Make/Model: Xterra P4X ZR2 Bison
- Year: '15/20
- Tim's: Medium DD
Re: Clicking Noise from Engine
I presume you checked oil level.
Check for pending codes to see if it spark knock from bad gas. Hope it is somethign simple.
Check for pending codes to see if it spark knock from bad gas. Hope it is somethign simple.
#MoreRon
"Most of the members are people, but there are a few exceptions." - Miner
"Most of the members are people, but there are a few exceptions." - Miner
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
Checked the oil on my lunch is it is topped up it sounds like when you put a card in the spokes of a bike tire. and is coming from the top front of the engin. My guess right now is timing chain or guide.
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Adam
- Moderator
- Posts: 2962
- Joined: Wed Jul 30, 2008 4:10 pm
- Reactions score: 3
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: Clicking Noise from Engine
Timing chain guides worn down. Very common on the vq35 and vq40. Better to repair sooner than later if this is the issue.
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
as long as it gets me home tonight the truck can sit for the next 3 months till it's warm enough for me to work on it. lots of fun
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
Depending on what i find wrong with it a diesel might be in the future especially if it is a cost effective chage vs new motor
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: Clicking Noise from Engine
Diesel torque is very addictive.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Clicking Noise from Engine
Did it get you home?
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
nope it got home on the back of a flat bed the prognosis isn't good right now
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Adam
- Moderator
- Posts: 2962
- Joined: Wed Jul 30, 2008 4:10 pm
- Reactions score: 3
- Location: Ottawa Ontario
- Make/Model: Xterra SE SC
- Year: 2002
- Tim's: Medium Regular
Re: Clicking Noise from Engine
That's not good. The timing guides usually don't just start all of a sudden, it kind of slowly starts getting louder, and it sounds more like a whining/rattling sound.
Good luck Man.
Good luck Man.
There is more stupidity than hydrogen in the universe, and it has a longer shelf life. -Frank Zappa
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
This one just gave way luckily no bent valves had to take it to Mike at Milton and have to send a Big thanks to him and his guys for getting it back on the road. But it turned out to be the timing guide and a few other warn out parts not bad for an engine that has over 240k. But happy it's back.
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Clicking Noise from Engine
Good to hear luck was with you. Guess the mileage on the second belt should be a lot sooner than normal but I would not expect it to be that soon.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- BigRed44
- Premium Member
- Posts: 697
- Joined: Sun Feb 20, 2011 12:23 pm
- Reactions score: 1
- Location: Tavistock
- Make/Model: Xterra Off Road
- Year: 2007
- Tim's: French Vanilla
Re: Clicking Noise from Engine
with this being a chain should last another 200k ish depending on the guides again. and yes got very lucky with out busting a whole lot of things.
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Clicking Noise from Engine
Oh, right. Second gen are chains. I am going to have to keep an ear open for clicking...none so far (touch wood)...around 170,000 miles
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.