Hi I'm new - again
-
- I'm learning to use 4-hi
- Posts: 32
- Joined: Sat May 24, 2014 6:23 pm
- Reactions score: 0
- Location: Durham Region
- Make/Model: Xterra SE
- Year: 2002
Hi I'm new - again
I didn't have many posts here before and only went to AW once, but we had an 04 xterra than a 02. Anyways its been a few years without one and I have always missed it so I just picked up another 02 recently. I know it will probably never be as nice as the last but hopefully I can slowly find some used armour and parts to build her up a bit lol. First things first I need to find someone or a shop to help with a PML as I do not really have the space or tools here to get it done myself. Hopefully by next summer I can go on some trails
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Hi I'm new - again
Hi!
There are a few trails and runs where you can take a stock truck.
What are you thinking of doing for a PML? Cranking the torsion bars and adding longer shackles can work if the leafs are good.
There are a few trails and runs where you can take a stock truck.
What are you thinking of doing for a PML? Cranking the torsion bars and adding longer shackles can work if the leafs are good.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Bow_Tied
- Moderator
- Posts: 6161
- Joined: Mon Jun 02, 2008 11:20 pm
- Reactions score: 5
- Location: London
- Make/Model: Xterra P4X ZR2 Bison
- Year: '15/20
- Tim's: Medium DD
Re: Hi I'm new - again
Welcome back. If your new rig has higher miles new torsion bar adjusters can be a good idea too.
But lots of us drive stock, just remove the step bars and rigid mud flaps. I’ve been in a stock rig for years and still have fun.
But lots of us drive stock, just remove the step bars and rigid mud flaps. I’ve been in a stock rig for years and still have fun.
#MoreRon
"Most of the members are people, but there are a few exceptions." - Miner
"Most of the members are people, but there are a few exceptions." - Miner
-
- I'm learning to use 4-hi
- Posts: 32
- Joined: Sat May 24, 2014 6:23 pm
- Reactions score: 0
- Location: Durham Region
- Make/Model: Xterra SE
- Year: 2002
Re: Hi I'm new - again
Shes at 170km.Very clean truck though, same owner since 2005 and he always garage kept it and under sprayed it every year. First thing I did when I got home with it was remove the steps and flaps lol
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Hi I'm new - again
You are getting close to a timing belt change too.
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
- Snafu
- Moderator
- Posts: 4761
- Joined: Sun Jun 01, 2008 9:51 am
- Reactions score: 1
- Location: Fergus-Orangeville
- Make/Model: Xterra S
- Year: 2007
- Tim's: Double milk - no sugar
Re: Hi I'm new - again
<thumbs up>!
Worlds Greatest Acronym:
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.
A.D.O.S.S: Attention Deficit Oooooo Something Shiny! (thanks Simon!)
RIP - Keyser - July 2000 to September 2010 - hope we were as loyal to you as you were to us.