What did you do to your rig today?
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
Getting my new UCAs, Radflos, shackles and battery tray today. Been spraying all the bolts to make the install go faster on Monday. Thinking about getting some aluminum skid plates from a guy in the states. $1050US shipped to the house
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
-
- Premium Member
- Posts: 225
- Joined: Sun May 31, 2015 4:15 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: Xterra
- Year: 2015
- Tim's: Donut , Hot Chocolate
- Scotto
- Moderator
- Posts: 3426
- Joined: Sun Jun 01, 2008 8:41 am
- Reactions score: 0
- Location: Elora
- Make/Model: Xterra Off Road
- Year: 2006
- Tim's: L Reg
What did you do to your rig today?
Had to change out some gaskets on the passenger side exhaust. Couple heat shields needed to be ripped off due to rattling. That meant taking off the cat to get at the crap. Not a big deal but sort of a PITA.
As the truck hits its 16 year mark little bits are falling off. But still running like a bugger. Also have a new O2 sensor for the one that got hit by something at AW. Probably do that tomorrow when it's not raining.
400,000+km and still good! Aimimg for 500,000 on it.
Scott
Sent from my iThingy.
As the truck hits its 16 year mark little bits are falling off. But still running like a bugger. Also have a new O2 sensor for the one that got hit by something at AW. Probably do that tomorrow when it's not raining.
400,000+km and still good! Aimimg for 500,000 on it.
Scott
Sent from my iThingy.
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
Lol, depends on what you classify as "cheap". I will throw in delivery for a beer though.Incognito27 wrote:Does that mean you would sell me skid plates Cheap
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
Got my new Radflos, TC UCAs, dual battery tray and couple other things. Getting all the new stuff installed on Monday!! Pics to follow
-
- Premium Member
- Posts: 225
- Joined: Sun May 31, 2015 4:15 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: Xterra
- Year: 2015
- Tim's: Donut , Hot Chocolate
Re: What did you do to your rig today?
Yorkdiver wrote:Lol, depends on what you classify as "cheap". I will throw in delivery for a beer though.Incognito27 wrote:Does that mean you would sell me skid plates Cheap
Well the beer is a no brainer , i know the engine and transfer case ones are 30 bucks new , i know the radiatior one is 154 new , the gas tank however is the expensive one , from Nissan they are 354.00 pretty sure they are a little insane on that. so give me a affordable price and ill see what i can do. also don't forget i still want that air mattress for the Xterra
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
Just bought them. They are getting shipped tonight.
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
She got a tad fatter, roughly Titan fat!!
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Scotto
- Moderator
- Posts: 3426
- Joined: Sun Jun 01, 2008 8:41 am
- Reactions score: 0
- Location: Elora
- Make/Model: Xterra Off Road
- Year: 2006
- Tim's: L Reg
Re: What did you do to your rig today?
Looks like your approach angles will be good. Might be a little tight on straight on stuff. I would move the strap for the winch to a higher level.
But very nice!
Sent from my iThingy.
But very nice!
Sent from my iThingy.
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
The plate unbolts and the strap goes in a bit tighter. Just tossed it there after pulling a Ford pickup out of the snow last week
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
-
- Wrenchhead
- Posts: 215
- Joined: Sun May 06, 2012 2:24 pm
- Reactions score: 0
- Location: Petawawa
- Make/Model: Nissan xTerra Pro4x
- Year: 2011
- Tim's: Large One Milk
Re: What did you do to your rig today?
So I brain farted when I bought my m205 diff. I ensured it was 3.36 like all Pro4x's, except for manual. So the truck looks great, but is currently dysfunctional due to too much variance between the gears. That means, another upgrade!! 4.10s have been ordered and should be installed next month while I'm in the field
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
- Miner
- Don't follow me, you wont make it.
- Posts: 3375
- Joined: Sun Jun 01, 2008 1:19 am
- Reactions score: 0
- Location: Kingston
- Make/Model: Cummins 2500 HD
- Year: 2012
- Tim's: McD's 3C1S
Re: What did you do to your rig today?
Yeah you wouldn't have found a m205 with lower gearing than the 3.36, that was the lowest ratio available in the Titan and Armada.
Cummins - Zone, BD, AFE, Yokohama, Bestop, Access, VisonX, H&S
Simon wrote:It's not like the membership voted under control of a heavy hand...
Dammit, I've said too much...I'll have to ban you now
-
- Wrenchhead
- Posts: 206
- Joined: Wed Mar 04, 2015 8:29 pm
- Reactions score: 0
- Location: Angus
- Make/Model: Nissan Xterra Pro4X
- Year: 2015
- Tim's: Coffee w/a shot of milk
Re: What did you do to your rig today?
took her on a short trek to the provincial park and wandered around a bit, then gave her a bath. Getting excited about a new front bumper this weekend
Sent from my HTC One_M8 using Tapatalk
Sent from my HTC One_M8 using Tapatalk
-
- Premium Member
- Posts: 225
- Joined: Sun May 31, 2015 4:15 pm
- Reactions score: 0
- Location: Ottawa
- Make/Model: Xterra
- Year: 2015
- Tim's: Donut , Hot Chocolate
Re: What did you do to your rig today?
rcafcoburn wrote:took her on a short trek to the provincial park and wandered around a bit, then gave her a bath. Getting excited about a new front bumper this weekend
Sent from my HTC One_M8 using Tapatalk
So you did decide on the front bumper ?
- Morpheus
- Moderator
- Posts: 4318
- Joined: Wed Apr 09, 2008 8:42 am
- Reactions score: 0
- Location: Cambridge
- Make/Model: Xterra
- Year: 2003
- Tim's: 3x3
- Contact:
Re: What did you do to your rig today?
I plugged in the battery maintainer I forgot to plug in when I put it in storage.
-
- Wrenchhead
- Posts: 206
- Joined: Wed Mar 04, 2015 8:29 pm
- Reactions score: 0
- Location: Angus
- Make/Model: Nissan Xterra Pro4X
- Year: 2015
- Tim's: Coffee w/a shot of milk
Re: What did you do to your rig today?
I did, going with the hefty tube style with winch cradle and a stinger. Local guy in Edmonton is doing the work over the weekend while I'm visiting my fatherIncognito27 wrote:rcafcoburn wrote:took her on a short trek to the provincial park and wandered around a bit, then gave her a bath. Getting excited about a new front bumper this weekend
Sent from my HTC One_M8 using Tapatalk
So you did decide on the front bumper ?
Sent from my HTC One_M8 using Tapatalk
- PhullD
- Premium Member
- Posts: 267
- Joined: Thu Aug 13, 2015 8:40 am
- Reactions score: 0
- Location: Ottawa
- Make/Model: Nissan Xterra Pro4x
- Year: 2015
- Tim's: Tea
Re: What did you do to your rig today?
How long did it take you? Guys in Cali got it down to 3 hours. I will be doing it too at some point.Yorkdiver wrote:She got a tad fatter, roughly Titan fat!!
Sent from my iPad using Tapatalk