Need help finding...
- Bender
- Premium Member
- Posts: 2029
- Joined: Sun Feb 03, 2008 9:06 pm
- Reactions score: 0
- Location: Fergus
- Make/Model: Nissan Sentra SER
- Year: 2011
- Tim's: Mcdonalds coffee
Need help finding...
Some Jeep parts.
Its a really long story, but in short its for a family member. I don't have much family, and found my Aunt and uncle and 4 cousins last year or so a go living only 40 minutes away. Hadn't heard from them in 15 years.
Skipping forward, my youngest cousin is fixing up his dads old CJ7. My Uncle was the president of a huge off road club way back and went rallying in the day ( we call it wheeling they called it rallying?). He was sponsored by BF Goodrich back then, and the plaques on his old dash shows he was good at it.
My cousin is really in to auto shop at school and is looking to become a mechanic. Plus he wants to get in to wheeling. This is where they are looking to me for help! I don't know jeeps well, and I am not a mechanic, but I figured you all might be able to help me find what I need.
What I need is, and I quote "a slave cylinder kit for my clutch, the rubber inserts are scored and leaking so from what ive heard, ill i need is a kit".
It has a 2.5 liter 4 cylinder, the old Iron Duke in it.
I need help getting him these parts, but I have had not much luck with the little time on the net i have had. Prices and suppliers is what I need you to find when you are surfing the net. He has had the guys at Part source looking for a long time now, and he figures he will never hear back from them.
I appreciate anyone that helps me find what I need to look like the hero.
Cheers guys
Jay.
Its a really long story, but in short its for a family member. I don't have much family, and found my Aunt and uncle and 4 cousins last year or so a go living only 40 minutes away. Hadn't heard from them in 15 years.
Skipping forward, my youngest cousin is fixing up his dads old CJ7. My Uncle was the president of a huge off road club way back and went rallying in the day ( we call it wheeling they called it rallying?). He was sponsored by BF Goodrich back then, and the plaques on his old dash shows he was good at it.
My cousin is really in to auto shop at school and is looking to become a mechanic. Plus he wants to get in to wheeling. This is where they are looking to me for help! I don't know jeeps well, and I am not a mechanic, but I figured you all might be able to help me find what I need.
What I need is, and I quote "a slave cylinder kit for my clutch, the rubber inserts are scored and leaking so from what ive heard, ill i need is a kit".
It has a 2.5 liter 4 cylinder, the old Iron Duke in it.
I need help getting him these parts, but I have had not much luck with the little time on the net i have had. Prices and suppliers is what I need you to find when you are surfing the net. He has had the guys at Part source looking for a long time now, and he figures he will never hear back from them.
I appreciate anyone that helps me find what I need to look like the hero.
Cheers guys
Jay.
- X-Treme
- Moderator
- Posts: 1876
- Joined: Tue Apr 08, 2008 11:36 pm
- Reactions score: 0
- Location: Canada
- Make/Model: Xterra - Offroad
- Year: 2005
Re: Need help finding...
He really should be scouring the jeeps boards and asking questions there rather than Parts Source. Unfortunately I know nothing about jeeps and their parts so I can't help much either.
I'll try a Google search though and see what I can learn if anything. I let you know if I come up with anything.
I'll try a Google search though and see what I can learn if anything. I let you know if I come up with anything.
Watch it! I'm keeping my eye on you.
- Bender
- Premium Member
- Posts: 2029
- Joined: Sun Feb 03, 2008 9:06 pm
- Reactions score: 0
- Location: Fergus
- Make/Model: Nissan Sentra SER
- Year: 2011
- Tim's: Mcdonalds coffee
Re: Need help finding...
Thanks Gino. I have treid to explain about the forums on the net, but I think they thought I was talking about a search engine rather than...I don't know?
I can link him to jeepkings and U of J...any other canadian sites you people have?
I can link him to jeepkings and U of J...any other canadian sites you people have?
-
- Don't follow me, you wont make it.
- Posts: 1499
- Joined: Sun Jun 01, 2008 9:15 am
- Reactions score: 0
- Location: Smiths Falls
- Make/Model: Xterra XE stick
- Year: 2004
- Tim's: 60oz BEER please
Re: Need help finding...
http://www.autopartsway.ca/acp/index.cf ... K27~MD1217" onclick="window.open(this.href);return false;
Canadian and jeep parts, might find what he needs here, or atleast if he does a little leg work through them (which after all is half the rebuild project fun) he might be able to get sorted out. If I get some time on my days off, I will take a drive up the road, there is a shop which has all sorts of fancy jeepsters always hangin' around, they might have somethin' too. I'll let you know if I come up with anything.
later
E
Canadian and jeep parts, might find what he needs here, or atleast if he does a little leg work through them (which after all is half the rebuild project fun) he might be able to get sorted out. If I get some time on my days off, I will take a drive up the road, there is a shop which has all sorts of fancy jeepsters always hangin' around, they might have somethin' too. I'll let you know if I come up with anything.
later
E
(FOG MEMBER)-FRIENDS OF GEOFFREYs WITHOUT BATS]-
Where's Slawek?........... Crunch?
Aerosols may be depleting the ozone, but warning labels are depleting the gene pool
OF4WD-5557
Where's Slawek?........... Crunch?
Aerosols may be depleting the ozone, but warning labels are depleting the gene pool
OF4WD-5557
-
- Premium Member
- Posts: 572
- Joined: Sun Jun 01, 2008 7:08 pm
- Reactions score: 0
- Location: Tim Hortons in Miss
- Make/Model: Drewbicon
- Year: 2013
- Tim's: always
Re: Need help finding...
jay go to Nationals jeep site they have all the old clearance stuff from a Willy,s to the TJ you might find it there
not too sure though as it has been a while since I was on their site
not too sure though as it has been a while since I was on their site
What to do next
-
- I've used 4-lo
- Posts: 955
- Joined: Sun Jun 01, 2008 12:21 pm
- Reactions score: 0
- Location: Toronto
- Make/Model: Nissan Xterra XE
- Year: 2001
- Tim's: LG COFFEE 2 SGR
Re: Need help finding...
Hey Jay what if I call up my supplier at work and see if I can get a replacement slave cylinder or like you said the kit. I will call tomorrow.
I asked for a Jelly donut not a maple!!!
- Scotto
- Moderator
- Posts: 3426
- Joined: Sun Jun 01, 2008 8:41 am
- Reactions score: 0
- Location: Elora
- Make/Model: Xterra Off Road
- Year: 2006
- Tim's: L Reg
Re: Need help finding...
For anything Jeep he should really be in touch with Stu at Just Jeeps. They're in Toronto, but do ship parts.
http://www.justjeeps.com/" onclick="window.open(this.href);return false; But he has to call and talk to Stu - the linked page isn't going to give crap.
In the Fergus area, he can get in touch with Terry and Jim at the Howes/Reeves Chrysler Jeep on the Fergus/Elora Road. They're afiliated with a couple of clubs, JeepKings and Tri-City and should be able help for weird parts for old Jeeps. For this he would have to get his skinny ass over there to chat. They have a CJ5 sitting on the lawn for sale right now.
A general google on CJ5 gave me this:
http://www.jeep4x4center.com/cj5/menu.htm" onclick="window.open(this.href);return false;
And a click later I saw that a secondary slave cylinder is $62.95.
That should get him going.
Scott
http://www.justjeeps.com/" onclick="window.open(this.href);return false; But he has to call and talk to Stu - the linked page isn't going to give crap.
In the Fergus area, he can get in touch with Terry and Jim at the Howes/Reeves Chrysler Jeep on the Fergus/Elora Road. They're afiliated with a couple of clubs, JeepKings and Tri-City and should be able help for weird parts for old Jeeps. For this he would have to get his skinny ass over there to chat. They have a CJ5 sitting on the lawn for sale right now.
A general google on CJ5 gave me this:
http://www.jeep4x4center.com/cj5/menu.htm" onclick="window.open(this.href);return false;
And a click later I saw that a secondary slave cylinder is $62.95.
That should get him going.
Scott
- X-Treme
- Moderator
- Posts: 1876
- Joined: Tue Apr 08, 2008 11:36 pm
- Reactions score: 0
- Location: Canada
- Make/Model: Xterra - Offroad
- Year: 2005
Re: Need help finding...
Well a quick Google search gave me this page.
It's a start anyway. You weren't specific about what year the CJ was but that page has Jeep Slave Clutch kits for just about any jeep that used that part from a few different sources. I would check locally first though. Just Jeeps may be his best bet.
There is also this page or this page or this page.
It's a start anyway. You weren't specific about what year the CJ was but that page has Jeep Slave Clutch kits for just about any jeep that used that part from a few different sources. I would check locally first though. Just Jeeps may be his best bet.
There is also this page or this page or this page.
Watch it! I'm keeping my eye on you.
-
- Lugnut
- Posts: 50
- Joined: Sun Jun 01, 2008 9:52 am
- Reactions score: 0
- Location: Burlington
- Make/Model: Black Jeep Rubicon
- Year: 2003
- Tim's: Coffee, 2 cream, 1 sugar
Re: Need help finding...
"Quadratec"! You'll find anything for that old CJ or any other Jeep in this catalogue. http://www.quadratec.com/" onclick="window.open(this.href);return false;
The member formerly known as avidX...
-
- Newbie
- Posts: 14
- Joined: Sun Jun 01, 2008 10:14 pm
- Reactions score: 0
- Location: Norval ON
- Make/Model: Frontier CC
- Year: 2005
- Tim's: Double Double
Re: Need help finding...
I would like to offer up J.C. Whitney, these guys can get damn near anything for the old jeeps and they ship to canada all the time.
http://www.jcwhitney.com/Jeep-Parts/10108.jcw" onclick="window.open(this.href);return false;
http://www.jcwhitney.com/Jeep-Parts/10108.jcw" onclick="window.open(this.href);return false;
- Scotto
- Moderator
- Posts: 3426
- Joined: Sun Jun 01, 2008 8:41 am
- Reactions score: 0
- Location: Elora
- Make/Model: Xterra Off Road
- Year: 2006
- Tim's: L Reg
Re: Need help finding...
I made a mistake - at Just Jeeps it's Adrian who has his head screwed on straight. If you go thru Stu you have to be really sure he doesn't guide down into the tank eater pit, if you know what I mean He'll help out just fine, but you really have to GPS him into the parts you need.
Scott
Scott
- Bender
- Premium Member
- Posts: 2029
- Joined: Sun Feb 03, 2008 9:06 pm
- Reactions score: 0
- Location: Fergus
- Make/Model: Nissan Sentra SER
- Year: 2011
- Tim's: Mcdonalds coffee
Re: Need help finding...
Thanks for all the help guys! Thats awesome!!
I got the rest of the info:
1980 CJ7
2.5 litre Iron Duke motor.
I got the rest of the info:
1980 CJ7
2.5 litre Iron Duke motor.
- Bender
- Premium Member
- Posts: 2029
- Joined: Sun Feb 03, 2008 9:06 pm
- Reactions score: 0
- Location: Fergus
- Make/Model: Nissan Sentra SER
- Year: 2011
- Tim's: Mcdonalds coffee
Re: Need help finding...
Big Bird wrote:Hey Jay what if I call up my supplier at work and see if I can get a replacement slave cylinder or like you said the kit. I will call tomorrow.
Yes please!
-
- Wrenchhead
- Posts: 427
- Joined: Sun Jun 01, 2008 7:43 am
- Reactions score: 0
- Location: Sudbury
- Make/Model: Nissan Xterra SE
- Year: 2007
- Tim's: lemon pie, jerkass!
Re: Need help finding...
I'll be honest, I only read the first line of your post.
Try here:
http://www.sudburyjeep.proboards41.com" onclick="window.open(this.href);return false;
Try here:
http://www.sudburyjeep.proboards41.com" onclick="window.open(this.href);return false;
2007 Nissan Xterra SE
Zero Mods
Zero Mods
-
- I've used 4-lo
- Posts: 955
- Joined: Sun Jun 01, 2008 12:21 pm
- Reactions score: 0
- Location: Toronto
- Make/Model: Nissan Xterra XE
- Year: 2001
- Tim's: LG COFFEE 2 SGR
Re: Need help finding...
I'll be getting an answer from my suppliers today at work. I'll keep you posted Jay.
I asked for a Jelly donut not a maple!!!