Canadian Nissan Truck Club

Welcome to the club!

Welcome to the club!

Congratulation guys!!!

Washed the pathy today, then applied two cans of Rustcure 3000 to the rear spring perch and surrounding, and to the rust prone area in the front, strut mounts, etc. Hopefully it'll slow the rust down. Then tire rotation and alignment next week...

Adam, need more pics!

Dudu: Tip of the Day... When installing skid plates, use a hydraulic jack and balance the skid plate on top of the round lifter. Gently maneuver the jack (with skid plate) under the vehicle. Use the handle as per instructions to jack the skid plate up to the height of the undercarriage. Adjust as n...

Happy birthday Bender!!!

Wheeled it yesterday - pre-adventure weekend Cleaned it today, real clean... Bled the brake Painted and installed the shackles, front and mid skid plate Its definitely a bad idea trying to install a steel skid plate single-handedly. I used my forehead to balance the skid in the middle while insertin...

Took out the rad and hosed it down real clean...
Rinsed the condenser as well
Replaced and bled the brake fluid (Thanks to Big_Bird)
Rinsed the air box too, no more rats nest
Got the front skid plate removed eventually (Thanks to Slawek and Drew)

I'm off to paint my skid plate now

Replaced transmission, transfer case, front and rear diff fluids...

3M Duct-tape held my inner wheel well for two years!!!

I've got the same code on the pathy as well. P1491 - I think its also vacuum cut valve bypass valve. Is it the same location for the pathy?

I recently had mine replaced with EBC dimpled rotors and green pads, pretty happy with the performance. The brakes work fine at all time, cold or warm. I didn't notice significant improvement over the OEM though, maybe I didn't step on the brakes hard enough

I was thinking mice, which is altogether possible between June and August, if you didn't start the truck at all in those months. It's either that, or someone stuffed a bull rush into your intake... http://en.wikipedia.org/wiki/Typha" onclick="window.open(this.href);return false; Thanks......

It could be a beaver who entered via the 1.75" abs pipe and tried to build a dam in my intake box? Should have kept the "beaver dam", so I won't ever hydrolock, hahahhaa... I let it sit outdoor between June and August last year. There wasn't any nest when I last checked. Engine has be...

About one year ago... Even then, I think it shouldn't be as filthy as I've only been to two mild trails and 99.9% of the time I drive on the highway... As for water crossing, its never been higher than the rocker panel

I cleaned up the air filter and was surprised by the things I found in my air box. There were plenty of dried twigs and leaves and I have only been on two trails this year. I've no idea how they got in there considering the air intake was raised http://i687.photobucket.com/albums/vv237/dududuckling/...

Welcome to CNTC!!!

271,000 km and its still going strong!!!

Browsed through my friend's pictures on facebook and I spotted Drew's truck @Petsmart somewhere in Missi.

I only saw the front end coz the picture was cut... lifted maroon X with shrock bumper, black grill, and snorkel and MTs, lol