Search found 19 matches
- Thu May 09, 2013 9:50 pm
- Forum: Problems & Fixes
- Topic: LP10000 Superwinch Problem
- Replies: 6
- Views: 6264
Re: LP10000 Superwinch Problem
Ok I tried to bypass the solenoid and I believe I did it correctly, but not really sure. I used jumper cables and attached the ground wire (black) to the negative on the battery and touched the power (red) on "D" and then "F" ..... but when I did nothing happened, nothing turned....
- Wed May 08, 2013 12:17 pm
- Forum: Problems & Fixes
- Topic: LP10000 Superwinch Problem
- Replies: 6
- Views: 6264
Re: LP10000 Superwinch Problem
Thanks for the ideas, I'll try out bypassing the solenoid. I like lookzcustoms idea but with a RG item from PA they scribe "RG" everywhere. Its scribed in 6 to 8 places on all different areas ..... but I do remember not seeing it on the actual solenoid itself :twisted: . Could pick up anot...
- Tue May 07, 2013 8:33 pm
- Forum: Problems & Fixes
- Topic: LP10000 Superwinch Problem
- Replies: 6
- Views: 6264
LP10000 Superwinch Problem
I was able to pick this up in the bargain bin at PA last week for $150 bucks, it was a RG (returned good) item they said. I was told it was tested and worked, it also came with a 30 day warranty ... so I said why not. Anyways long story short .... it doesn't work, I hooked it up to the truck and I g...
- Wed Sep 19, 2012 10:34 am
- Forum: Problems & Fixes
- Topic: Centerlink Question
- Replies: 7
- Views: 6452
Re: Centerlink Question
Yes please ..... and thank you.Geoffrey wrote:I've rebuilt the steering 4 times. The last attempt has worked. If you want full details say so. It was a lot of work.
Sent from my iThingy
- Tue Sep 18, 2012 8:59 pm
- Forum: Problems & Fixes
- Topic: Centerlink Question
- Replies: 7
- Views: 6452
Centerlink Question
Hi, just wanted to know if the centerlink pivots/rocks on the idler arm bolt or should it be a solid point that only rotates on the axis of the bolt. Same question goes for the pitman arm attachment. The idler arm assembly will be replaced shortly but just not sure if the centerlink needs replacing ...
- Thu Aug 30, 2012 12:24 pm
- Forum: General Chit Chat
- Topic: What did you do to your rig today?
- Replies: 2835
- Views: 1558699
Re: What did you do to your rig today?
Oil change, rotated tires, and installed rock sliders .... all in prep for AW.
- Wed May 23, 2012 10:17 am
- Forum: General Chit Chat
- Topic: Anyone have an engine?
- Replies: 12
- Views: 8138
Re: Anyone have an engine?
Check this out. Hopefully the link works. Its a 2001 being parted out, looks to have front end damage but the engine might be still good.
http://ontario.kijiji.ca/c-cars-vehicle ... Z380897246
Simps
http://ontario.kijiji.ca/c-cars-vehicle ... Z380897246
Simps
- Fri Nov 11, 2011 9:42 am
- Forum: Problems & Fixes
- Topic: Truck won't warm up
- Replies: 22
- Views: 16188
Re: Truck won't warm up
Mine had the same thing a year ago or so. Even when I was at a stop light the heat would slowly turn to cold air, once I started moving it would blow hot air no problem. Haven't had that problem yet this year, I guess if you leave it long enough like me it fixes itself. Lol.
- Fri Aug 12, 2011 10:26 am
- Forum: General Chit Chat
- Topic: What did you do to your rig today?
- Replies: 2835
- Views: 1558699
Re: What did you do to your rig today?
Well, what I did to my rig was done over the last month or so. Along with some help from good friends. Installed 3" SL from AC with Bilstein shocks, rear stainless brake line (fronts are not in yet), heavy duty tie rod adjusters, put on some 285/75/16 Mickey Thompson ATZ's, and a set of Hella 5...
- Thu Oct 14, 2010 12:21 pm
- Forum: Problems & Fixes
- Topic: R51 Fan Clutch Shot?
- Replies: 16
- Views: 9419
Re: R51 Fan Clutch Shot?
I belive it was set to the defrost/floor mode at the time. Ill try and remember to turn it off next time im stopped to see if this is the issue. thanks.
- Thu Oct 14, 2010 7:52 am
- Forum: Problems & Fixes
- Topic: R51 Fan Clutch Shot?
- Replies: 16
- Views: 9419
Re: R51 Fan Clutch Shot?
Is this the same fan that could cause a rough idle? Basically, if im sitting still with the brake on (like in the never ending TIm's line-up) it goes off and on every 20 seconds or so.....when its on the rpm go down to 700 or so, causing the truck to have a rough idle.
- Mon Oct 11, 2010 6:13 pm
- Forum: Problems & Fixes
- Topic: Torsion Bar
- Replies: 7
- Views: 5693
Re: Torsion Bar
Well I guess I was wrong about replacing anything .....both arms are now inside the crossmember though.......I will keep an eye on it until it is replaced.Simon wrote:That adjuster should now be replaced, as it will never be as strong as original if bent back into shape.
- Mon Oct 11, 2010 6:03 pm
- Forum: Problems & Fixes
- Topic: Torsion Bar
- Replies: 7
- Views: 5693
Re: Torsion Bar
Who fixed the truck after the driver side collapsed and what caused the driver side to drop? Well the truck was still under warranty at the time of the collapse so Nissan towed it to the nearest dealership, it went to Kingston to get fixed. And as for the reason.....I have no idea, I was driving do...
- Sun Oct 10, 2010 2:38 pm
- Forum: Problems & Fixes
- Topic: Torsion Bar
- Replies: 7
- Views: 5693
Torsion Bar
I was going to crank up the bars to lift the font end and encountered this: http://i368.photobucket.com/albums/oo124/simps19/IMG00249.jpg Its kind of hard to see but the adjustment nut that the torsion bar finger rest on has turned. The one half on the finger is bent which allows the nut to fall thr...
- Fri Jun 04, 2010 12:46 pm
- Forum: General Chit Chat
- Topic: Need to lift it
- Replies: 11
- Views: 7275
Re: Need to lift it
I'm running 265/70/16 BF Goodrich A/T's on my X right now, they don't rub when I lock the steering hard. They do rub if I pull into a driveway a little to fast though.
- Wed May 19, 2010 9:16 pm
- Forum: Welcome!
- Topic: Hello from Cambridge
- Replies: 19
- Views: 15050
Re: Hello from Cambridge
Ozzker wrote:Welcome!! I too am in Cambridge!
What color is your X?
I think its call Gold Rush. I will get a picture of it in my avatar soon.
Simps19
- Wed May 19, 2010 9:03 pm
- Forum: Welcome!
- Topic: Hello from Cambridge
- Replies: 19
- Views: 15050
Re: Hello from Cambridge
I did have both back wheels off the ground before though. At the same time, on purpose? Welcome! :thumbup: Ya at the same time. I think it was the 3rd time I was out, a friend and I hit a gravel pit just outside of town. He had a Jeep with a 4" lift and he went over the edge just fine. I follo...
- Wed May 19, 2010 8:55 pm
- Forum: Welcome!
- Topic: Hello from Cambridge
- Replies: 19
- Views: 15050
Re: Hello from Cambridge
I live in Galt. I see your from Smith Falls, but do you know the area?HolidayNation wrote: What part of the city you from?
Simps19
- Wed May 19, 2010 1:19 pm
- Forum: Welcome!
- Topic: Hello from Cambridge
- Replies: 19
- Views: 15050
Hello from Cambridge
Hi Everyone, I have a 2002 Xterra that is pretty much stock at the moment, but looking to upgrade alot of things in the future. I hope to get out to a trail run when some upgrades get put on and meet up with some of the members in the area. This forum is awesome with so much information, I will be r...