What did you do to your rig today?

General Chat about the forum, it's members & their trucks.

Re: What did you do to your rig today?

Postby Bow_Tied » Mon Aug 29, 2022 9:09 pm

Nice.

Put the skids back on the X. What a royal pain in the ass. I need to design new ones.

Also changed the oil and finished the install of a 4/7 pin trailer connecter in bumper to get rid of the OE one that is mounted in the trailer hitch which has been busted off by rocks a couple times.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Phil0110 » Mon Aug 29, 2022 11:22 pm

I changed the stabilizer bars today
Phil0110
Newbie
 
Posts: 9
Make/Model: Pickup
Year: 1988
Tim's: Coffee

Re: What did you do to your rig today?

Postby Adam » Wed Sep 07, 2022 1:17 pm

Bow_Tied wrote:Nice.

Put the skids back on the X. What a royal pain in the ass. I need to design new ones.

Also changed the oil and finished the install of a 4/7 pin trailer connecter in bumper to get rid of the OE one that is mounted in the trailer hitch which has been busted off by rocks a couple times.

That is really a piss poor design choice, they should have drilled the bumper at the dealer for that or the factory. I imagine even a mainly street driven truck would damage it at some point.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Thu Sep 08, 2022 9:44 pm

Did the rear brakes on the X tonight. Went well, surprisingly, however the ebrake doesn't grab like it did before I didn't touch the ebrake adjustment. Weird.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Thu Sep 08, 2022 9:45 pm

I helped Phil with those before, should just be able to adjust the star wheel behind the rotor? I think we just did it 3-4 clicks at a time until it grabbed better. Also perhaps the shoes need to bed into the rotor.

How are the front brakes?

Ordered parts for mine today... Knock sensor, upper intake gasket set and leaf spring bushings.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Thu Sep 08, 2022 10:01 pm

Front brakes working well. I got new rotors to put on.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Fri Sep 09, 2022 7:17 pm

Add starter to the list... Took almost 30 tries before it rolled over trying to leave work today.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Wed Sep 14, 2022 9:51 pm

After a full weekend of mounting an atenna, running the coax from rear to front, and mounting the kit, I got the final touches on a new CB install for the Colorado complete. Excited to try it out on the road. This CB has a lot of features I don't yet understand. Might need Big Red's help.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Wed Sep 14, 2022 11:07 pm

Nice. What model did you go with?

Ordered the correct leaf spring bushings today with the help of Morpheus.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Tue Sep 20, 2022 9:58 pm

Adam wrote:Nice. What model did you go with?


Stryker SR-25MC. Very compact, top view is barely bigger than an iphone, so this allowed me to install it in the cubby ahead of the shifter. The antenna I got is neat - it has two thumbwheels integrated into the bottom of the antenna that are used to dial in the SWR. Had it tuned at Lazer, SWR is 1.15 :dance:
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Wed Sep 21, 2022 9:41 am

Damn that's a great looking unit. Been meaning to look at something to install below the radio cubby.

Screenshot 2022-09-21 093652.png


bearcat.png


That's what I was going to purchase but could be a tight fit.
You do not have the required permissions to view the files attached to this post.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Wed Sep 21, 2022 10:49 pm

I like the unit I purchased. But it has some drawbacks: it’s expensive, the channel up down buttons are on the top of the microphone, and it has no PA function. It does have some HAM functions, but I don’t know how to use them. Also, the microphone jack is not typical, it is an RJ 45.

The channel up down buttons on the mic Could become a positive if I could get used to it. Aside benefit is that it will also control the squelch up and down, and other menu functions.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

What did you do to your rig today?

Postby Adam » Sun Sep 25, 2022 6:13 pm

I think you also need a license to use the HAM function.

I like the look of it and the size is an important factor since finding a place that doesn’t stick out on the gen 1 is kind of hard. I don’t like where the one is now, passengers hit their legs on it.


Sent from my iPhone using Tapatalk
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Mon Sep 26, 2022 11:00 pm

Adam wrote:I think you also need a license to use the HAM function.


Probably


Adam wrote:I like the look of it and the size is an important factor since finding a place that doesn’t stick out on the gen 1 is kind of hard. I don’t like where the one is now, passengers hit their legs on it.


Sent from my iPhone using Tapatalk


Same issue in our X, the standard size uniden works well enough, and will work better when I rejig the antenna set-up. But it doesnt fit anywhere well.
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Fri Sep 30, 2022 3:38 pm

Yeah, I'm hoping since I have a single DIN radio now, that the new cb can just mount under there where that semi useless pocket is.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby BigRed44 » Tue Oct 11, 2022 11:11 am

finally offloaded it off the trailer from MOAB now to the cottage for a couple day's
OF4WD 6318
HAM Call Sign VA3ERX
CNTC Member BigRed44
Overland Bound 9362
User avatar
BigRed44
Premium Member
Premium Member
 
Posts: 664
Make/Model: Xterra Off Road
Year: 2007
Tim's: French Vanilla

Re: What did you do to your rig today?

Postby Adam » Wed Oct 12, 2022 10:14 am

Any new problems from the wheeling down there?
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Mon Oct 17, 2022 9:27 pm

trail rash :lol:
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

Re: What did you do to your rig today?

Postby Adam » Tue Oct 18, 2022 10:03 am

Hahaha

I got the bearcat 880 cb for my birthday. So now I have to figure out mounting it in the DIN spot below the radio.
I have too many cars.
User avatar
Adam
Moderator
Moderator
 
Posts: 2837
Make/Model: Xterra SE SC
Year: 2002
Tim's: Medium Regular

Re: What did you do to your rig today?

Postby Bow_Tied » Tue Oct 18, 2022 6:19 pm

Will you be able to hear its speaker in that spot? Or do you plan to run a separate speaker?
#MoreRon

"Most of the members are people, but there are a few exceptions." - Miner
User avatar
Bow_Tied
Moderator
Moderator
 
Posts: 6102
Make/Model: Xterra P4X ZR2 Bison
Year: '15/20
Tim's: Medium DD

PreviousNext

Return to General Chit Chat

Who is online

Users browsing this forum: No registered users and 11 guests

cron